+ Reply to Thread
Results 1 to 9 of 9

Thread: kernel power issue

  1. #1
    [RCF] Member
    Join Date
    Jan 2015
    Location
    dirty jersey
    Posts
    111

    Default kernel power issue

    need a little help trouble shooting rig, what are the tolerances for a psu? is dropping to 11.81v during load mean failing? getting kernel power issues when gaming. even at stock speeds processor and gpu same results.

  2. #2
    [RCF] Member
    Join Date
    Dec 2015
    Posts
    26

    Default

    What are specifications of P/S?
    Manufacturer?
    Watt?
    How many 12V Rails? 2? 4? Are they all used?

    Willy

  3. #3
    [RCF] Member
    Join Date
    Jul 2013
    Posts
    23

    Default

    11.81V is excellent during load. What are your 5.0V and 3.3V rails under load? Did you remember to plug in the 4-pin (or 8-pin) CPU power connector(s). These are near the top-center of the motherboard and augment the CPU power draw from the 24-pin motherboard power connector. Does your system crash to a blue screen or shut down completely?

    I got this from the EVGA forum: ATX standards specify that power supplies have a +/- 5% maximum variance tolerance on each rail. For each rail, the voltages should be in between:

    5 VDC
    +4.75 V to +5.25 V

    −5 VDC
    –4.50 V to –5.50 V

    +12 VDC
    +11.40 V to +12.60 V

    −12 VDC
    –10.8 V to –13.2 V

    +3.3 VDC
    +3.135 V to +3.465 V

    +5 VSB
    +4.75 V to +5.25 V

    I believe if you have a Corsair Power Supply, the guaranteed tolerance is a function of the series (bronze, gold, platinum).

  4. #4
    [RCF] Member
    Join Date
    Jan 2015
    Location
    dirty jersey
    Posts
    111

    Default

    was mainly thinking ps from the dip , but maybe chip just needs more voltage. older i7930 ..

  5. #5
    [RCF] Member
    Join Date
    Jan 2015
    Location
    dirty jersey
    Posts
    111

    Default

    OK this time today was able to talk in to for a bit before shut down. Has to be driver related temps are all in range , and only looses video when gaming ...

    have tried down clocking chip nd gpu's , different cable from monitor to tower, ddu nvidia drivers reinstall, all hardware is runnjing cooler than normal as i clocked everything down but still getting this shit going on. all the reading i have done nothing has fixed.
    Last edited by GuiltyG3ar; Apr-15-2018 at 08:58 AM.

  6. #6
    [RCF] Member
    Join Date
    Jan 2015
    Location
    dirty jersey
    Posts
    111

    Default

    basically down till i can figure this out yay...

  7. #7
    [RCF] Member
    Join Date
    Jan 2015
    Location
    dirty jersey
    Posts
    111

    Default

    Gotta save for a card I guess gunna grab a evga gtx1070 sc black edition, as I can get a full cover block for it . Not going to run sli until I build my new x299 monster

  8. #8
    [RCF] Member
    Join Date
    Jan 2015
    Location
    dirty jersey
    Posts
    111

    Default

    nvlddmkm

    getting errors regarding this as well tdr shit , I really don't think card (S) are bad , up until last few updates ran fine games for hours . But I can't remember which update was stable , am able to watch movies , browse use the PC for everything else just games make signal go out .. so guess until video card see you guys later .
    Last edited by GuiltyG3ar; Apr-17-2018 at 04:08 AM.

  9. #9
    [RCF] Member
    Join Date
    Jan 2015
    Location
    dirty jersey
    Posts
    111

    Default

    OK , so ripped out the cards , moved the second card from third to last pcie lane. So far so good , ran benchmarks etc no video loss

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts